Polyurethanes: new 3D-Modelling and Tooling Techniques.
A revolutionary 3D-modelling and tooling technology has been developed by an Austrian SME. This technology is used to produce models from polyurethanes in a close contour casting process. By providing close contour casts, this company’s customers save up to 30% in labor costs and up to 40% in material costs. Partners active in the area of polyurethanes are sought for commercial agreement with technical assistance.
Partner expertise sought
The Austrian SME is a start-up (founded in 2015) active in the plastic industry. In the fields of aerospace, automotive and engineering, big blocks from polyurethane or epoxy resins are used for 3D-modelling or tooling. It is state of the art to produce these blocks from standardized plates, which are glued together and milled to the final contour. This method leads to a whole list of disadvantages: - By glueing standardized plates, only a very rough approximation of the desired model is possible. - Due to this fact, the milling itself is time consuming. - Additionally much more non-recyclable material than necessary is wasted. - Natural gaps appear in the glued areas, thus reducing the optical and mechanical properties of the product. - Within these gaps air bubbles or shrink holes can appear, leading to even more problems. Alternative technologies like injection molding or 3D-printing cannot be used for block production based on their lack in flexibility or their inability to produce bigger parts respectively. These problems generated the motivation to develop a completely new approach to produce blocks primarily from polyurethanes but also from epoxy resins. A casting process using an adjustable mold can manufacture blocks with a contour quite close to the final structure rather than just roughly approaching it like in the plate glueing process. Usually the density and the shore-d hardness are the most important material features for customers. In general all material data can be freely adjusted within the physical limits. The lowest density is 0.7 g/cm³ with a shore-d hardness of 66, the highest density is 1.8 g/cm³, which leads to a shore-d value of 86. Other material properties have as well been evaluated and are available on material data sheets. The Austrian SME is looking for partners for the commercialization of the product through a commercial agreement with technical assistance. (Industrial) Partners of any size from all regions are sought who have a strong knowledge, understanding and demand of the polyurethane (plates) technique (e.g.in the area of aerospace, automotive, design, architecture, ship building, tooling, 3D-modelling, etc.). Furthermore, partners are sought who are willing to apply the novel system and give feedback for further development and optimization of the product.
Advantages and innovations
In comparison to state of the art technologies the main advantages of the custom shaped blocks are: a. Decreasing total costs by ~ 35 %: The fully automated procedure -> - 30% of labor costs and - 40% of material costs b. Decreasing time in the whole process chain: No glueing plan & no glueing, less material to be milled, milling without supervision possible c. Superior material properties: Uniform structure & homogeneous material -> best optical and mechanical qualities Compact material -> wet milling and direct tool manufacturing is possible d. Waste reduction: 40 % less non-recyclable waste produced
Already on the market
Intellectual Property Rights (IPR)
Secret Know-how,Patent(s) applied for but not yet granted
Register your interest
How it works
- Tell us about yourself
- We’ll discuss with you
- We put the right partners in touch
EEN help you find the right partner, rather than you going it alone.
Our role is to review and collate the most suitable submissions, and then send them to the client who posted the opportunity. We consult with you, and the client, to make the process professional and easy.
These are live opportunities. Your registration of interest on the site is just like a professional approach to a business at a networking event. To stand the best chance of success, make your submission really sing. Sell why the client who posted the opportunity should work with you. Excite them. Ask questions. Try and avoid copy and pasting words from elsewhere.
Once the client has chosen their partner, we'll introduce them over email and keep in touch with both parties to see how it's going. Sometimes things progress quickly. Sometimes because of changing priorities for either party, things progress slowly, but you never know - your next big business break could start right here.
First we need to check you’re human.
Thank you for verifying your email. We have sent you a confirmation email containing a 6 digit verification code to unlock the form below