Partnering opportunity

Design of a cheap microhydro plant, with the use of pumps as turbines


An Italian University has developed a procedure for the selection of a pump suitable for operation as a turbine (PAT) in microhydro power plants by using the data of the hydraulic resource and the technical characteristics supplied by centrifugal pump manufacturers. This allows a considerable saving of money since the PAT are cheaper than the micro turbines traditionally used for such applications. They look for international partners under commercial agreements with technical assistance.

Partner sought

The Italian university is looking for industrial partners interested in energy efficiency solutions, such as: micro hydro power plants; companies active in the hydroelectric power sector; companies involved in the design and/or management of drinking water networks; irrigation systems and purification plants designers. The Italian R&D team will provide the know-how and the necessary services to implement the solution for the selection of PAT, in the context of commercial agreements with technical assistance.


The Department of mechanical, energy and management engineering of an Italian university has developed a computer code based on combined statistical and numerical methods, allows the selection of a pump suitable for operation as a turbine (PAT) in microhydro power plants, with the data of the hydraulic resource and the technical characteristics supplied by centrifugal pump manufacturers. In an energy scenario today characterized by an impoverishment of traditional energy sources, the exploitation of small energy resources is attractive and is now an obligation. The plants exploit micro-hydraulic resources (less than 100 kW) that, although interesting, are penalized by the excessive cost of small turbines. The use of PAT (pumps as hydraulic turbines) is a smart and important alternative. Centrifugal pumps are mass-produced for a wide range of heads and flow rates, so their main cost is lower than that of the turbines and their maintenance is easier, due to the availability of spare parts, even in developing countries. The efficiency of these machines will be lower but, since they exploit otherwise wasted energy sources, this is not a critical problem. The application of PAT in the pico / micro-hydroelectric range is recommended for energy production in rural, remote and hilly areas where water streams flow with a certain level difference. Other interesting fields of application are: - energy recovery from drinking water networks, wherever there are hydraulic pressure drops induced by the aqueduct regulating valves; - energy recovery from irrigation systems, where pipelines with relatively high flow rates and pressures are present. - energy recovery from the water supply pipe of the purification plants. From the economic point of view, it is often stated that pumps operating as turbines in the range of 1 to 100 kW involve payback periods of two years or less, which is considerably lower than that of a conventional turbine. Unfortunately, although a large number of centrifugal pumps are commercially available for a hydroelectric micro-engineering plant, the manufacturers do not provide information on the performance of centrifugal pumps in turbine mode. Therefore, establishing a procedure that allows the passage from the characteristics of the "pump" to the characteristics of the "turbine" is the main challenge in the use of a PAT (pump as a turbine). Through this procedure a pump is selected, its characteristic curves are obtained in the inverse operating mode and, finally, the operating point is identified. This also makes it possible to estimate the annual energy yield of the machine and the comparison of alternative solutions. The Italian University is looking for international partners who are interested in implementing the proposed technology, in order to recover energy more efficiently. The cooperation will be carried out in the framework of commercial agreements with technical assistance.

Advantages and innovations

The proposed procedure can select centrifugal pumps to be employed as turbines for hydrological sites characterized by powers under 100 kW (micro hydro power plants). This will bring a considerable saving of money since the cost of the centrifugal pumps is very low with respect to the micro turbines traditionally used for such applications. The novelty consists in an overall procedure, able to find the best PAT suitable for an assigned resource and able to detect the performance curves without resorting to any test, and without taking any geometrical measurement on the selected pump, thing this to avoid, being forced, in such case, to disassemble the machine.

Development stage

Field tested/evaluated

Intellectual Property Rights (IPR)

Secret Know-how

Register your interest

How it works

  • Tell us about yourself
  • We’ll discuss with you
  • We put the right partners in touch

EEN help you find the right partner, rather than you going it alone.

Our role is to review and collate the most suitable submissions, and then send them to the client who posted the opportunity. We consult with you, and the client, to make the process professional and easy.

These are live opportunities. Your registration of interest on the site is just like a professional approach to a business at a networking event. To stand the best chance of success, make your submission really sing. Sell why the client who posted the opportunity should work with you. Excite them. Ask questions. Try and avoid copy and pasting words from elsewhere.

Once the client has chosen their partner, we'll introduce them over email and keep in touch with both parties to see how it's going. Sometimes things progress quickly. Sometimes because of changing priorities for either party, things progress slowly, but you never know - your next big business break could start right here.

?What value does EEN add?
This is your pitch: remember to include your unique selling points (USP) and why someone would want to do business with you
Tell us why you are a good fit for this opportunity, and why you think you're the right people for this partnership
If there's anything additional, or commercially sensitive you'd like to know about this opportunity, please let us know

When you entered your email address above, we emailed you a code to verify you're human and have access to that account.

?What's this?

What next?

To finish up, we just need some extra details about you and your company